🖥️ Ulanzi TC001 API Monitor

Transform your Ulanzi TC001 pixel clock into a powerful API monitoring display. Monitor any JSON API endpoint and display custom data with icons, scrolling text, and automatic brightness control.

🚀 Install Firmware

⚠️ Requirements

  • Google Chrome or Microsoft Edge browser
  • USB cable connected to TC001 device
  • Device in bootloader mode (if needed)
⚠️ Important: This Will Erase All Settings

This installer performs a complete firmware installation and will erase all existing configuration including WiFi credentials and API settings. You will need to reconfigure your device after installation.

💾 Updating Existing Device? Backup First!

If you're updating an existing device, use the Backup & Restore feature in the web interface first! This will save all your settings (API endpoint, display preferences, icons, brightness, etc.) to a JSON file. After installing the new firmware, you can restore your configuration in seconds.

⚠️ Your browser doesn't support Web Serial API. Please use Google Chrome or Microsoft Edge. ⚠️ Serial port access not allowed. Please check browser permissions.

Click the button above and select your TC001 device's serial port when prompted.

📖 After Installation

1. The device will restart automatically
2. Connect to the "TC001-XXXXXX" WiFi network if first install
3. Configure your WiFi and API settings via the web interface
4. Access the web UI at the device's IP address
5. Default password is "ulanzitc001"

📦 GitHub Repository 📚 Documentation 🐛 Report Issues

Ulanzi TC001 API Monitor - Built for the community

Web Installer Powered by ESP Web Tools